Posted on Leave a comment

How to use a Film Picker to Retrieve 35mm Film from the Cartridge

Film Picker film retriever


Have you ever finished a roll of film early, only to have the camera automatically rewind it back into the canister? Fear not, film photography enthusiasts! This guide will show you two methods for safely retrieving stuck film, whether you have a handy film retriever tool or not.

Method 1: Using a Film Picker

For the most reliable and stress-free film extraction, a film retriever is the way to go. Here’s how to use it:

  1. Take your time and be gentle. Rushing can damage the film.
  2. Insert the pronged end of the retriever into the canister slot.
  3. Slide the first retrieval slide on the tool forward.
  4. Rotate the canister spindle counter-clockwise. Pay close attention for a clicking sound.
  5. Stop after you hear four clicks. This ensures proper film engagement.
  6. Slide the second retrieval slide forward.
  7. With a swift, but controlled pull, separate the retriever and film canister. The film should now be safely extracted!

Method 2: Using Spare Film (Optional)

If you don’t have a film retriever, don’t worry! You can improvise with a spare roll of film. There are video tutorials available online that can walk you through this process in detail the one below is a video I made a few years ago.


Posted on Leave a comment

How to Load a 4 x 5 Large Format Film Holder

4 x 5 Large format sheet film holders
4 x 5 Large format sheet film holders

Shooting with large format film cameras has a timeless charm that continues to attract photographers worldwide. The 4×5 large format film holder plays a crucial role in this process, as it holds and protects the light-sensitive film that captures stunning images. We stock a range of 4 x 5 and 8 x 10 film and large format holders and the MOD54 to help you process your large format film.

What is a 4×5 Large Format Film Holder?

A 4×5 large format film holder is a device used to hold a single sheet of 4×5 inch film securely in place inside a large format camera. It typically consists of two parts: a light-tight outer shell and a removable dark slide that covers the film to protect it from exposure to light. Loading the film holder correctly is essential to ensure precise and breathtaking photographs.

Before diving into the loading process, it’s crucial to understand the various parts of a 4×5 film holder. Familiarise yourself with the outer shell, the dark slide, and the film slot where the 4×5 film sheet will be inserted.

Preparing the Film Holder for Loading

To achieve optimal results, proper preparation of the film holder is necessary. Ensure the film holder is clean, and the light seals are intact to prevent any light leaks during exposure.

Cleaning the Film Holder

Using a soft, lint-free cloth, carefully wipe the interior and exterior surfaces of the film holder to remove any dust or debris that might affect the image quality.

Checking the Light Seals

Inspect the light seals of the film holder to ensure they are in good condition. Damaged or worn-out light seals can lead to unwanted light leaks, which can ruin your photographs.

Handling and Loading the Film

Now that the film holder is ready, handle the large format film with care to avoid fingerprints or scratches on its emulsion side. Take the unexposed film and load it into the film holder with the emulsion facing outward. This must be done in a fully light sealed room or a darkbag.

Posted on Leave a comment

How to Make a Short Roll of Film for Testing 35mm Film Cameras

How to make a short film roll

Learn how to create a short roll of film for testing 35mm film cameras using a used film canister and a new roll of film. This guide provides step-by-step instructions and essential tips for photography enthusiasts.

Introduction:

When it comes to testing 35mm film cameras or troubleshooting potential issues, creating a short roll of film can be incredibly helpful. This simple technique allows you to check the functionality and performance of your camera without wasting an entire roll of film. In this guide, we’ll walk you through the process of making a short roll of film using a used film canister and a new roll of film.

Step 1: Gather the necessary materials

To begin, gather a used film canister and a fresh roll of 35mm film, tape, scissors and a film changing bag. The used film canister should be empty except for a small bit of residual film that is capable of securely holding the new roll of film.

Step 2: Prepare the canister

Ensure the used film canister is clean and dry. Take a moment to inspect the canister for any physical damage or debris that could affect the film’s performance or scratch the film.

Step 3: Load the new roll of film

Carefully unwind a small portion of the leader from the new roll of film. Cut it in a straight line and tape it to the small leader sticking out of the empty canister. Gently wind the film onto the spool, ensuring it remains taut and evenly distributed throughout the canister.

Step 4: Move the canisters into the darkbag

Pull the two rolls apart inside the dark bag to the desired length of the short roll, I find the width of film changing bag is perfect for a roll of about 12 shots. Ensure the film is fully protected from exposure to light, as even brief exposure can ruin the images.

Step 5: Label the canister

To avoid confusion, label the canister with essential information such as the film type, ISO/ASA rating, and the number of exposures. This labeling will help you keep track of the film’s characteristics during testing.

Step 6: Testing your camera

Now that you have your short roll of film ready, insert it into your 35mm film camera as you would with a regular roll. Follow your camera’s instructions for loading film, advancing frames, and rewinding. Use this opportunity to capture a few test shots in various lighting conditions and different settings. By doing so, you can evaluate the camera’s performance, exposure accuracy, focus, and any potential issues.

Conclusion:

Creating a short roll of film for testing 35mm film cameras is a practical technique that saves both time and resources. By repurposing a used film canister and a new roll of film, you can easily assess your camera’s functionality and troubleshoot any issues before committing to a full roll. This process allows you to fine-tune your camera settings and gain confidence in its performance. Now you’re ready to embark on your photographic journey with a reliable and well-tested film camera!

Remember to have fun and experiment with different settings and subjects to truly understand your camera’s capabilities. Happy shooting!